Français
Deutsch
Test and Setting
Look at our wide range of Test and Setting Tools
Programming Remote Control
The remote control keypad has:
- 4 function keys in the middle: temperature, fan, light, sunblind
- 3 operation keys at the top: up key, down key and tilt key
- 2 occupancy / unoccupancy keys at the bottom: occupied mode, unoccupied mode
Infrared or radio test remote control
Mainly dedicated to integrators or installers, the TCND-I-Test remote controlis used to check the electric installation operating. This tool allows to control individually each controller outputs in order to test the wiring.
The radio remote control also allows to check the coupling of remote controls with their allocated receivers.
DALI test Infrared remote control
The DALI test remote control is dedicated to the test of the DALI network. Used jointly with an infrared receiver and a DALI lighting controller connected to a DALI network, it allows:
- To check a DALI ballast by means of the device address (0 to 63 ballasts)
- To check a group of DALI ballasts by means of the group address (0 to 15 groups)
- To check the DALI network (with all ballasts connected)
Radio remote control
A radio remote control allows to:
- Control a building floorin large buildings.
- Control the on/off lighting outputs and sunblind outputs (up / down) (1 channel needs
- to be used by floor)
- Manageup to 32 floors in a same building
