LonWorks Configurable Controllers - ECC and Karno Series

NEW!

Eu.bac certified solutions: be sure to download the datasheet to know more!

Applications: HVAC terminals such as radiators, chilled beams, chilled ceilings, etc. Are particularly effective at driving 0-10VDC variable speed motors which provide energy savings and noise comfort, and also for air quality and pulse counters management.

• LonWorks 2.0, latest generation FT5000 Neuron processor: eliminating LNS costs
• 230VAC power supply
• Inputs and outputs freely configurable
• Up to 5 configurable inputs
• 1 input 0-10 VDC
• 1 Direct RJ9
• 2 programmable outputs for 0-10 VDC valves, air damper or variable speed drive
• 3 fan-speed outputs (230VAC) or On-Off air damper
• 2 outputs for PWM or 0-10 VDC valves (depending on model)
• 1 output for electric heater
• Valve control:  230VAC, 24VAC or 0-10VDC

Applications: mainly dedicated to fan coil applications, to control temperature in a room.
Directly installed onto a fan coil, one FCC controls fan speed and temperature (a warm valve or an electric heater for heating and a cold valve for air conditioning).

• LonWorks 2.0, latest generation FT5000 Neuron processor: eliminating LNS costs
• 230VAC power supply
• 2 digital inputs
• Up to 4 analog inputs
• 1 Direct RJ9
• 2 TRIAC outputs for PWM valves
• 3 fan-speed output (230 VAC)
• 1 output for electric heater
• Valve control: 230VAC or 24VAC

Applications: manages 2 independent control loops (optimizing the modules quantity installed in offices). One SRC-427-DL can be connected to 1 or 2 lights add-on modules, each one driving 2 light groups (application dedicated primarily to chilled beam facilities, especially when lighting is directly integrated onto the beam).

• LonWorks 2.0, latest generation FT5000 Neuron processor: eliminating LNS costs
• 6 configurable inputs
• 2 RJ9 inputs
• 2 configurable outputs for 0-10 VDC valves or variable speed drive
• 4 TRIAC outputs (230 VAC) for 4 PWM configurable valves
• 2 relay outputs (230 VAC)
• 2 outputs for electric heater

Applications: control of single duct VAV and VVT applications

• 4 universal inputs 
• 6 outputs : 4 digital (TRIAC) and 2 universal 
• 6 network outputs 
• High accuracy 16 bit analog to digital converter 
• 1 on-board pressure transducer
• Use spare I/O for separate control sequences
• Demand control ventilation supported - CO₂  
• Open-to-Wireless: support of wireless battery-less inputs

Applications: control of cooling only VAV boxes and cooling with reheat VAV boxes

• Cost efficient VAV controllers
• Designed for: 1 floating valve, 2 On Off valves, 2 duct heater stages
• 2 universal inputs
• 2 digital (TRIAC) outputs
• 1 LED output
• Built-in brushless, constant speed damper actuator with integrated position feedback
• Smart-Sensor and LCD compatible
• Open-to-Wireless: support of wireless battery-less inputs

Controller for roof topunits (including those with an economizer)

Applications: mechanical stages, modulating valves, floating outputs… 

• Control up to 4 stages of heating or cooling
• Control the static pressure
• Manage appliances for humidity control
• Demand averaging on up to 128 VAVs
• 6 Universal Inputs
• 5 TRIAC Outputs (PWM or digital)
• 2 Tri-mode analog outputs (0-10 V, PWM, or digital 0-12 V)

Controller for heat pump applications (air or water sourced)

Applications: dual mode heat pumps, modulating valves, water to refrigerant heat pumps

• Supports up to 4 stages of cooling or heating
• Dehumidification Cycle
• 6 Universal Inputs
• 5 TRIAC Outputs (PWM or digital)
• 2 Tri-mode analog outputs (0-10V, PWM, or digital 0-12V)